They’re easy to take for granted, but the walls and ceilings in your home are asked to do a lot — from setting your interior color palette and displaying décor to weathering the pounding and pressure they take from kids, pets and adults alike. It’s no wonder why the experts recommend repainting your walls every few years.
But cut corners or prep improperly and you’ll likely need to recoat a lot more often. That’s why it pays to plan a painting project right.
Over time, walls and ceilings will fade with the sun and tastes will change. So every few years, it’s good to repaint the common spaces of a home to hide wear and tear and accommodate any new furniture purchases.
The most used spaces in your home that see the most foot traffic — like your entryway, living room, and bathrooms — are often the ones that need the most painting TLC.
The good news is that, if you use the best quality paint, you will only need to repaint every five to seven years.
Do-it-yourselfers can tackle any interior painting project, provided they have the know-how and proper materials. Still, it’s easy to make mistakes and suffer painter’s remorse if you’re not adequately prepared. To ensure a more perfect paint job, follow these best practices:
A paint job is only as good as the prep work you put in. Before you begin painting, clear the room of as much furniture as you can and cover your floors with a rosin paper. If furniture must stay in the room, move it to the center and cover with two layers of plastic. Be sure to tape down the plastic on the rosin paper so that furniture is not accidentally exposed to paint splatter.
Fill nail holes, repair drywall, sand down rough spots, and mask ceiling edges, wall edges, trim, and doors with painters tape. Take your time and do the job right. Spend 75 percent of your time on the project on this preparation step.
A great primer will hide the wall’s imperfections and help the paint adhere properly, preventing it from peeling in the future. Note that you can skip this step if the paint you choose has primer built-in.
Evaluate the current condition of your walls. If they are made of older plaster with a lot of imperfections or waviness, use a flat finish instead of eggshell finish. Remember that the higher the gloss or sheen, the more you will see the wall’s flaws; with that in mind consider a matte finish on most walls and ceilings, an eggshell sheen on bathroom walls and a semi-gloss finish on trims, moldings, and doors. Additionally, before settling on a color, apply a paint sample to a piece of poster board and move it around your room to make sure you like the color choice in different areas of your space. Study how the lighting in the morning and evening affects the color’s appearance.
Choose a durable paint, which will produce a longer-lasting result. Select an eco-friendly paint with a no-VOC base mixed with a no-VOC pigment. Also, buy enough paint for the project: One gallon typically covers about 300 square feet.
For a professional-looking paint job, the recommended process is to start at the top and work your way down the wall. First, paint the ceiling, then one coat on the wall, followed by two coats on trim, a final coat on the wall, and lastly, two coats on the baseboard. It’s often best to first paint the edges with a brush; then, apply paint with a roller in a zigzag pattern, going in several directions. To prevent splatter, move slowly.